{"id":85,"date":"2011-08-02T01:40:33","date_gmt":"2011-08-02T01:40:33","guid":{"rendered":"http:\/\/bathursthandyman.ca\/?p=85"},"modified":"2011-08-02T01:40:33","modified_gmt":"2011-08-02T01:40:33","slug":"pressure-treaded-decks-repair-or-not","status":"publish","type":"post","link":"https:\/\/buildingology.com\/?p=85","title":{"rendered":"Pressure Treaded Decks.  Repair or Replace?"},"content":{"rendered":"<p>Here is a hypothetical scenario (that I ran into last month) \u00a0 Take a guess on which options are more environmentally friendly.\u00a0 This is not as easy as you think.<\/p>\n<p>You have an old patio deck that is 10-15 years old made of pressure treated wood.\u00a0 The stain is almost completely gone, and the wood has splintered in many areas and in rough shape. You think the deck is at the end of life, but you are not sure.<\/p>\n<p><a href=\"https:\/\/buildingology.com\/wp-content\/uploads\/2011\/08\/IMG_27401-1.jpg\"><img loading=\"lazy\" decoding=\"async\" class=\"alignright size-full wp-image-148\" title=\"Pressure Treated decking\" alt=\"\" src=\"https:\/\/buildingology.com\/wp-content\/uploads\/2011\/08\/IMG_27401-1.jpg\" width=\"640\" height=\"480\" srcset=\"https:\/\/buildingology.com\/wp-content\/uploads\/2011\/08\/IMG_27401-1.jpg 640w, https:\/\/buildingology.com\/wp-content\/uploads\/2011\/08\/IMG_27401-1-300x225.jpg 300w\" sizes=\"auto, (max-width: 709px) 85vw, (max-width: 909px) 67vw, (max-width: 984px) 61vw, (max-width: 1362px) 45vw, 600px\" \/><\/a><\/p>\n<p>&nbsp;<\/p>\n<p>Here are your options for the plan of action.<\/p>\n<ol>\n<li>Replace the deck with a more environmentally friendly product that uses 75% post-consumer waste as the main decking material.<\/li>\n<li>Stain the deck again, by pressure washing or sanding the old stain off, and make small repairs where needed to try and extend the life.<\/li>\n<\/ol>\n<p>There are other options of course, but lets stick with these two for the time being.<\/p>\n<h2>The answer is&#8230;<\/h2>\n<h2>It depends, but probably #1,<\/h2>\n<h2>but most likely not for the reason you think!<\/h2>\n<p>The reason why #1 is probably a better choice is because prior to 2004, pressure treated wood was \u201ctreated\u201d using chromium and arsenic.\u00a0 The wood is called <a href=\"http:\/\/en.wikipedia.org\/wiki\/Chromated_copper_arsenate\" target=\"_blank\" rel=\"noopener\">Chromated Copper Aresenate (CCA)<\/a> pressure treated.\u00a0 Yep, companies actually put carcinogens in our decks if you can believe it, until it was banned in residential use in Canada and the US.\u00a0 Side note: it is still used in telephone\/hydro poles today in new installations.\u00a0 Today, the residential sector mostly uses <a href=\"http:\/\/en.wikipedia.org\/wiki\/Alkaline_copper_quaternary\" target=\"_blank\" rel=\"noopener\">Alkaline Copper Quaternary (ACQ)<\/a> or less common\u00a0 <a title=\"Copper Azole\" href=\"http:\/\/en.wikipedia.org\/wiki\/Wood_preservation#Copper_azole\" target=\"_blank\" rel=\"noopener\">Copper Azole<\/a> pressure treated, which is far less carciogenic, but also has it&#8217;s caveats which I will not discuss in this article.\u00a0 Its also the stuff that&#8217;s now available at the big box stores.\u00a0\u00a0 You may have read about CCA\u00a0 in the news about ten years ago about this stuff being used in playground equipment in public schools.\u00a0 Ring a bell?\u00a0 There is a website devoted to this stuff <a href=\"http:\/\/www.noccawood.ca\/articles.htm\" target=\"_blank\" rel=\"noopener\">noccawood.ca<\/a> though slightly out of date, it still has good articles.<\/p>\n<p>My first gut feeling for this answer is to prolong the life of the deck, to reduce the amount of waste that ends up in the landfills by staining the deck.\u00a0\u00a0 Of course that deck will eventually be land-filled, but you are consuming less by protecting what you have now.\u00a0 It\u2019s like buying a new car ever three years when a lease expires.\u00a0 Granted, someone else does use that car after three years, but no one will use your deck after you throw it out to the landfill.<\/p>\n<p>The environmental issue here is, to properly stain a deck, you need to pressure wash it (or sand it).\u00a0 If someone came in to pressure wash that deck, some of the chemicals are still encapsulated in the wood, but not nearly as much as when it was new.\u00a0 The pressure washing could scatter some of those chemicals out of the wood.\u00a0 The amount is not much, but I still would never recommend doing that.\u00a0 Contained environmentally friendly items are always safer than uncontained.\u00a0 Also, the soil directly under the deck is the area that will have the most chemicals in it.\u00a0 When the deck is eventually removed, it must be done so with great caution, and the deck itself has no possible second use, and it&#8217;s life cycle ends.\u00a0 It must go to the dump as the chromium and arsenic cannot be extracted from the wood, and cannot be buried or burned.<\/p>\n<p>This is a similar concept as Green Houses Gases (GHG) in that carbon dioxide is trapped or stored in vegetation, and is released into the air when burned.\u00a0 The pressure treated deck stores in the carcinogenic chromium and arsenic, it is safer to have it trapped in the wood, than all over your lawn.\u00a0 Most likely you will have the highest rating in the soil within two feet beside of an installed CCA pressure treated deck (or under it). \u00a0 If you had this done in the past don&#8217;t freak out, if you had a good installer, they may have been extra careful, and you are probably fine.\u00a0 If you are skeptical, get the soil tested.\u00a0 You could use an environmental testing company.<\/p>\n<p>I guarantee you that not every decking company will take great caution when repairing or removing.\u00a0 Make sure they don&#8217;t use their saws to remove the old wood spewing sawdust in the air with this stuff.\u00a0 When you hire that deck company ask them what their removal procedures are, and keep in mind that the soil underneath the deck is probably contaminated.\u00a0 Do your research.<\/p>\n<p><a href=\"https:\/\/buildingology.com\/wp-content\/uploads\/2011\/08\/Buildingology-lessons-learned-1.png\"><img loading=\"lazy\" decoding=\"async\" class=\"alignnone size-medium wp-image-1063\" alt=\"Buildingology lessons learned\" src=\"http:\/\/buildingology.org\/wp-content\/uploads\/2011\/08\/Buildingology-lessons-learned-300x106.png\" width=\"300\" height=\"106\" \/><\/a><\/p>\n<p style=\"padding-left: 30px;\">It doesn\u2019t matter that scenario #1 has the recycled content, it is not nearly as important as the handling and disposal of the old deck from an environmental standpoint in this particular scenario.\u00a0 This of course is a tad oversimplified, but it is important to know that performing the most environmentally friendly action in home renovations does not always carry labels or bragging rights with it (if that is important to you).<\/p>\n<p style=\"padding-left: 30px;\">Here is a new question\u2026 If you get a new deck, is option #1 or new style ACQ pressure treated more environmentally friendly?\u00a0 The answer is as always \u201cit depends\u201d.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Here is a hypothetical scenario (that I ran into last month) \u00a0 Take a guess on which options are more environmentally friendly.\u00a0 This is not as easy as you think. You have an old patio deck that is 10-15 years old made of pressure treated wood.\u00a0 The stain is almost completely gone, and the wood &hellip; <a href=\"https:\/\/buildingology.com\/?p=85\" class=\"more-link\">Continue reading<span class=\"screen-reader-text\"> &#8220;Pressure Treaded Decks.  Repair or Replace?&#8221;<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":148,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"footnotes":""},"categories":[3],"tags":[5,10,11,13,21,22,24,25,28,29,68,81,82,85,105,113],"class_list":["post-85","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-home-improvement-environmental","tag-acq","tag-alkaline","tag-alkaline-copper-quaternary","tag-arsenic","tag-cca","tag-chromium","tag-copper","tag-copper-azole","tag-deck","tag-decking","tag-noccawood-ca","tag-pressure-treated","tag-pressure-wash","tag-quaternary","tag-stain","tag-toronto"],"_links":{"self":[{"href":"https:\/\/buildingology.com\/index.php?rest_route=\/wp\/v2\/posts\/85","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/buildingology.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/buildingology.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/buildingology.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/buildingology.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=85"}],"version-history":[{"count":0,"href":"https:\/\/buildingology.com\/index.php?rest_route=\/wp\/v2\/posts\/85\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/buildingology.com\/index.php?rest_route=\/wp\/v2\/media\/148"}],"wp:attachment":[{"href":"https:\/\/buildingology.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=85"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/buildingology.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=85"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/buildingology.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=85"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}